SECTION VI - PHYSICAL DATA
BOILING
POINT:
NOT
DETERMINED
MELTING POINT:
36
o
C
CAPOR PRESSURE:
NOT ESTABLISHED
SPECIFIC GRAVITY:
1.48 @ 25
o
C
VAPOR DENSITY (AIR=1):
GREATER THAN 1
SOLUBILITY IN WATER:
SOLUBLE
APPEARANCE
AND
COLOR:
WHITE
WAXY
SOLID
FLASH POINT & METHOD USED:
430
o
F (221
o
C) C.O.C.
FLAMMABLE LIMITS IN AIR,
% BY VOL. LOWER:
NOT ESTABLISHED
FLAMMABLE LIMITS IN AIR,
% BY VOL. UPPER:
NOT ESTABLISHED
NFPA
RATING:
NO
NFPA
RATING
HMIS
RATING:
HEALTH
(0)
FIRE (1)
REACTIVITY (0)
SPECIAL FIRE FIGHTING
PROCEDURES AND PRECAUTIONS:
(INDIVIDUALS SHOULD PERFORM ONLY THOSE FIRE FIGHTING PROCEDURES
FOR WHICH THEY HAVE BEEN TRAINED) USE WATER SPRAY, DRY CHEMICAL,
FOAM OR CARBON DIOXIDE. USE WATER TO KEEP FIRE-EXPOSED CONTAINERS
COOL. IF A SPILL OR LEAK HAS NOT IGNITED, USE WATER SPRAY TO DISPERSE
THE VAPORS. WATER SPRAY MAY BE USED TO FLUSH SPILLS AWAY FROM THE
FIRE AND DILUTE SPILLS TO NONFLAMMABLE MIXTURES.
UNUSUAL FIRE AND EXPLOSION
HAZARDS:
FIREFIGHTERS SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS IN
THE POSITIVE-PRESSURE MODE WITH A FULL FACEPIECE WHEN THERE IS A
POSSIBILITY OF EXPOSURE TO SMOKE, FUMES OR HAZARDOUS
DECOMPOSITION
PRODUCTS.
SECTION
VIII-
REACTIVITY
STABILITY:
GENERALLY
STABLE
HAZARDOUS POLYMERIZATION:
NONE LIKELY
CONDITIONS & MATERIALS TO AVOID:
KEEP AWAY FROM HEAT AND FLAMES. AVOID CONTACT WITH OXIDIZING
MATERIALS.
HAZARDOUS DECOMPOSITION
PRODUCTS:
DECOMPOSITION MAY PRODUCE OXIDES OF CARBON.
SECTION IX - EMPLOYEE PROTECTION
CONTROL MEASURES:
HANDLE IN THE PRESENCE OF ADEQUATE VENTILATION.
RESPIRATORY PROTECTION:
WHERE EXPOSURE IS LIKELY TO EXCEED ACCEPTABLE CRITERIA (SEE SECTIONS II AND
IV), USE NIOSH/OSHA APPROVED RESPIRATORY EQUIPMENT. RESPIRATORS SHOULD
BE
SELECTED BASED ON THE FORM AND CONCENTRATION OF CONTAMINANT IN AIR AND IN
ACCORDANCE WITH OSHA (29 CFR 1910.134).
PROTECTIVE CLOTHING:
WEAR GLOVES AND PROTECTIVE CLOTHING WHICH ARE IMPERVIOUS TO THE PRODUCT
FOR THE DURATION OF ANTICIPATED EXPOSURE IF THERE IS POTENTIAL FOR
PROLONGED OR REPEATED SKIN CONTACT.
EYE PROTECTION:
WEAR SAFETY GLASSES MEETING THE SPECIFICATIONS OF ANSI STANDARD Z87.1
WHERE NO CONTACT WITH THE EYE IS ANTICIPATED. CHEMICAL SAFETY GOGGLES
MEETING THE SPECIFICATIONS OF ANSI STANDARD Z87.1 SHOULD BE WORN WHENEVER
Page No. 2 of 3 - MSDS - JEEMATE 1000-DPS
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email:
info@jeen.com
, Website:
www.jeen.com
