Galil Motion Control amp 19540 manual Page 13
OVERTEMP
If the heat sink temperature rises above 110 °C the amplifier disables and will automatically re-enable when the
temperature drops below 110°C.
ERROR
Reflects the status of the controller's (NOT the amplifier's) error digital output. This indicator lights under the following
conditions:
(1)
when the RESET button on the AMP-19520/40 is pushed (this toggles the controller's Reset digital input)
(2)
momentarily lights when power is applied to the controller
(3)
one or more of the controller's axes is not following well (TE exceeds ER)
(4)
when a controller hardware failure occurs (e.g. 5 V supply out of tolerance, corrupted firmware...).
AMP-19520/40
Indicator Lights and Errors
·
13
