New! DMC-3425 E-Series Controller
Each DMC-3425 controller also provides
such standard features as:
Precise control of two motors
ECAM, gearing and both linear and circular interpolation
for coordinated motion along the two local axis
Three uncommitted digital inputs and outputs
Two uncommitted analog inputs
Expansion for up to 64 additional I/ O
Non-volatile program memory, variables, and arrays
Forward and reverse limits for each axis
Home inputs for each axis
PID filtering with notch and feedforward parameters
Accepts encoder frequencies up to 12 MHz for servos
Commands stepper motors up to 3 MHz
Controls two servo motors or one servo and one stepper motor
Compact size: 3.75" x 5.0"
Connections made with a single 37-pin D type connector
The DMC-3425 two-axis controller costs just $695.00 in single
quantity, and lowers to $445.00 in quantities of 100. Available for
Galil's DMC-3425 provides highly versatile, powerful distri-
buted control where multiple DMC-3425 controllers are linked
together on the Ethernet. One "master" DMC-3425 receives
motion commands for up to eight axes from the host computer
and relays them to up to three other "slave" DMC-3425 con-
trollers. The result is faster, and more efficient communications
since all the multiple communication links usually required
between the host computer and each controller are eliminated.
Galil Motion Control, Inc.
3750 Atherton Road
Rocklin, CA 95765 USA
You can get more information about the E-Series from Galil. Jacob Tal, president and founder of Galil, provides a pre-recorded web
presentation at www.galilmc.com/training/webconf.html.
You can also see Jacob Tal's technical article on Distributed Control at www.galilmc.com/news/servo.html. For details about the
DMC-3425, go to www.galilmc.com/products/eseries/dmc3425.html.
Finally, don't hesitate to discuss the E-Series with any of our application engineers by calling 800-377-6329.
More About the E-Series
©Copyright 2000 Galil Motion Control, Inc. 8/00 5M