Galil Motion Control note 1412 Page 1
DMC-1700
Application Note 1412: Cables & Interconnection for DMC-
1700
This note describes the recommended cables and interconnection for use with the DMC-
1700 controller. Please review the figure below.
DMC-1710 to DMC-1740:
NAME
TYPE
PURPOSE
CABLE-100-1M
OR
CABLE-100-4M
(1 Cable Required)
1 Meter, 100 Pin High
Density Cable
4 Meter, 100 Pin High
Density Cable
Connects DMC-1700 to ICM-2900.
Provides all signals except Auxiliary
Encoder Inputs
CABLE-26-25
(1 Cable Required)
26 Pin IDC to 25 Pin D-
Type, 1 Meter Length
Connects DMC-1700 to ICM-2900.
Provides connection for Auxiliary
Encoder Inputs
Note: This cable is only required if the
Auxiliary Encoder Inputs will be used.
ICM-1900
(1 Required)
Interconnect Module
Provides screw terminals for access to
all signals from the controller
