Galil Motion Control - note 1412 (Page 4)

Galil Motion Control note 1412 Page 4

J5

J1

ICM-1900

J6

J8

ICM-1900

J7

DMC-1780

CB-50-100-1780

Adapts 2 50 Pin Ribbon Cables

for CABLE-100

(Ribbon Cables Included)

CABLE-100-1M (1 METER)

OR

CABLE-100-4M (4 METER)

CABLE-26-25

Provides Connection for Auxiliary

Encoder Signals

26 Pin IDC to 25 Pin D-Type

Note: This cable is only required if

the Auxiliary Encoder Inputs will be

used.

ICM-1900

Provides Access to Signals for

Axes E-H via Screw Terminals

ICM-1900

Provides Access to Signals for

Axes A-D via Screw Terminals

Figure 1. DMC-1780 Controller with recommended cables for system connection.

Note 1: The ICM-1900 interconnect module is recommended. For other methods of
interconnection, such as using the ICM-2900, please contact Galil.