Galil Motion Control note 1412 Page 3
DMC-1750 to DMC-1780:
NAME
TYPE
PURPOSE
CABLE-100-1M
OR
CABLE-100-4M
(2 Cables Required)
1 Meter, 100 Pin High
Density Cable
4 Meter, 100 Pin High
Density Cable
1st Cable Connects the DMC-1700 to
an ICM-1900 and provides all
connections for Axes A-D except
auxiliary encoder inputs.
The 2
nd
Cable Connects the ICM-1900
to the DMC-1700 via the CB-50-100-
1700. This cable provides all
connections for Axes E-H except
auxiliary encoder inputs.
CB-50-100-1700
(1 Set Required)
2 x 50 pin Ribbon Cables
with the CB-50-100 Adapter
Board.
Adapts 2 50 Pin Ribbon Cables for
CABLE-100
(Ribbon Cables Included).
CABLE-26-25
(2 Cables Required)
26 Pin IDC to 25 Pin D-
Type, 1 Meter Length
The 1
st
Cable Connects the DMC-1700
to the ICM-1900 and provides
connection for Auxiliary Encoder
Inputs for Axes A-D
The 2
nd
Cable Connects the DMC-
1700 to the ICM-1900 and provides
connection for Auxiliary Encoder
Inputs for Axes E-H
Note: This cable is only required if the
Auxiliary Encoder Inputs will be used.
ICM-1900
(2 Required)
Interconnect Module
The 1
st
ICM-1900 provides screw
terminals for access to all signals for
Axes A-D
The 2
nd
ICM-1900 provides screw
terminals for access to all signals for
Axes E-H
