Galil Motion Control note 1412 Page 2
J5
J1
ICM-1900
DMC-1740
CABLE-100-1M (1 METER)
OR
CABLE-100-4M (4 METER)
CABLE-26-25
Provides Connection for Auxiliary Encoder Signals
26 Pin IDC to 25 Pin D-Type
Note: This cable is only required if the Auxiliary
Encoder Inputs will be used.
DMC-1740
1-4 Axes ISA Bus Controller
ICM-1900
Provides Access to Controller Signals via Screw Terminals
Figure 1. DMC-1740 Controller with recommended cables for system connection.
Note 1: The ICM-1900 interconnect module is recommended. For other methods of
interconnection, such as using the ICM-2900, please contact Galil.