DMC-1600
Application Note 1411: Cables & Interconnection for DMC-
1600
This note describes the recommended cables and interconnection for use with the DMC-
1600 controller. Please review the figure below.
DMC-1610 to DMC-1640:
NAME
TYPE
PURPOSE
CABLE-100-1M
OR
CABLE-100-4M
(1 Cable Required)
1 Meter, 100 Pin High
Density Cable
4 Meter, 100 Pin High
Density Cable
Connects DMC-1600 to ICM-2900.
Provides all signals except Auxiliary
Encoder Inputs
CABLE-36-1M
OR
CABLE-36-4M
(1 Cable Required)
1 Meter, 100 Pin High
Density Cable
4 Meter, 100 Pin High
Density Cable
Connects DMC-1600 to ICM-2900.
Provides connection for Auxiliary
Encoder Inputs
CABLE-100-1M
OR
CABLE-100-4M
(1 Cable Required)
1 Meter, 100 Pin High
Density Cable
4 Meter, 100 Pin High
Density Cable
Connects the DMC-1600 to an IOM-
1964-100.
Note: This cable is only required if the
Extended I/O will be used.
CABLE-36-1M
(1 Cable Required)
26 pin IDC - 25 pin D-type,
male
Connects DMC-1600 to ICM-2900.
Provides connection for Auxiliary
Encoder Inputs.
Note: This cable is only required if the
Auxiliary Encoder Inputs will be used.
ICM-2900-FL
(1 Required)
Interconnect Module with
Flange Mount
Provides screw terminals for access to
all signals from the controller except
Auxiliary Encoder Inputs
ICM-2908
(1 Required)
Interconnect Module
Provides screw terminals for access to
the Auxiliary Encoder Inputs.
Note: This module is only required if
the Auxiliary Encoder Inputs will be
used.
IOM-1964-100
Opto-Isolation Module for
Extended I/O. Connects to
CABLE-100
Provides opto-isolation for extended
I/O and allows easy access via screw
terminals.
