Galil Motion Control note 1411 Page 2
ICM-2908
ICM-2900
0
1
3
2
7
6
4
5
IOM-1964-100
CABLE-100-1M (1METER)
OR
CABLE-100-4M (4METER)
CABLE-36-1M (1METER)
OR
CABLE-36-4M (4METER)
ICM-2908
Provides Connection to All
Auxiliary Encoder Signals
ICM-2900
Connection to
Signals for Axes A-D
DMC-1600
Compact PCI 1-4 axes
Controller with 64
additional I/O
IOM-1964-100
Provides Opto-Isolation
and Interconnection for
Extended I/O
Figure 1. DMC-1600 Controller with recommended cables for system connection.
Note 1: The ICM-2900 and ICM-2908 interconnect modules are recommended. For
other methods of interconnection, such as using the ICM-1900, please contact Galil.
Note 2: The IOM-1964-100 opto-isolation unit is recommended for the DMC-1600.
This unit provides opto-isolation for the 64 extended I/O signals on the controller.
These signals can also be adapted for connection to Grayhill (Model 70GRCM32-HL)
and OPTO-22 (model G4PB24) opto-isolation modules using the CB-50-80-1600
adapter board. Please contact Galil for further information.
NAME
TYPE
PURPOSE
CB-50-100-1600
(1 Required)
The CB-50-100 Adapter
Board with 2 x 50 pin
Ribbon Cables
Provides 2 50 Pin IDC cables from
CABLE-100. These cables can be
inserted directly into interconnect
boards such as Grayhill.
