DMC-1200
Application Note 1410: Cables & Interconnection for DMC-
1200
This note describes the recommended cables and interconnection for use with the DMC-
1200 controller. Please review the figure below.
DMC-1210 to DMC-1240:
NAME
TYPE
PURPOSE
CB-50-100-1200
(1 Required)
2 x 50 pin Ribbon Cables
with the CB-50-100 Adapter
Board.
Provides 100 Pin High Density
Connection for CABLE-100
CABLE-100-1M
OR
CABLE-100-4M
(1 Cable Required)
1 Meter, 100 Pin High
Density Cable
4 Meter, 100 Pin High
Density Cable
Connects CB-50-100-1200 to ICM-
1900
CABLE-20-25
(1 Cable Required)
20 pin IDC - 25 pin D-type,
male, 1 Meter Length
Connects to ICM-1900. Provides
Access to Auxiliary Encoders
Note: This cable is only required if the
Auxiliary Encoder Inputs will be used.
ICM-1900
(1 Required)
Interconnect Module
Provides screw terminals for access to
all signals from the controller
DMC-1250 to DMC-1280:
NAME
TYPE
PURPOSE
CB-50-100-1200
(2 Required)
The CB-50-100 Adapter
Board with 2 x 50 pin
Ribbon Cables
Provides 100 Pin High Density
Connection for CABLE-100
CABLE-100-1M
OR
CABLE-100-4M
(2 Cables Required)
1 Meter, 100 Pin High
Density Cable
4 Meter, 100 Pin High
Density Cable
1st Cable Connects the ICM-1900 to
the DMC-1200 via a CB-50-100-1200.
This cable provides all connections
for Axes A-D except auxiliary encoder
inputs.
The 2
nd
Cable Connects the ICM-1900
to the DMC-1200 via a CB-50-100-
1200. This cable provides all
connections for Axes E-H except
auxiliary encoder inputs.
CABLE-20-25
(2 Cables Required)
20 pin IDC - 25 pin D-type,
male, 1 Meter Length
The 1
st
Cable Connects the DMC-1200
to the ICM-1900 and provides
connection for Auxiliary Encoder
