Find Docs

Galil Motion Control - catalog (Page 34)

Wodocs >> Electronics : Motion Control >> Galil Motion Control catalog Page 34
Galil Motion Control - catalog
I/O DESCRIPTION
Inputs:
Encoder, A+, B+: Position feedback
from incremental encoder with two
channels in quadrature. The encoder
can be linedrive (±12 V) or TTL.
Note: Encoders that produce out-
puts in the format of pulses and
direction can also be used.
Encoder index, I+: Once-per-revolu-
tion encoder pulse; used in
Homing sequence or Find Index
command. Minimum index pulse
width is 120 nsec.
Encoder, A-, B-, I-: Optional differen-
tial inputs from encoder; used for
enhanced noise immunity.
Auxiliary encoder: Inputs for addition-
al encoder; used when encoders on
both the motor and the load are
required.
Abort*
#
: Stops commanded motion
instantly and also aborts application
program.
Reset*
#
: System reset.
Forward and reverse limit switch
#
:
When active, inhibits motion in
forward or reverse direction and
also causes the limit switch sub-
routine #LIMSWI to execute.
Home switch
#
: Input for Homing
(HM) and Find Edge (FE) instruc-
tions.
Input 1­ Input 8
#
: Uncommitted
inputs; can be defined by the user
to trigger events or interrupt pro-
gram. Inputs 9­24 available with
DMC-1550 ­1580 (inputs 9­16
are optoisolated, inputs 17­24 are
TTL).
Latch
#
: High-speed position latch to
capture axis position within 25 µsec
(bypass optoisolation for .1 µsec
capture). AL command arms latch.
Input 1, 2, 3, 4 latches X, Y, Z, W
respectively. Inputs 9, 10, 11, 12
latches E, F, G, H respectively for
DMC-1550­1580.
Analog 1­ Analog 7: Analog inputs
that can be connected to external
analog signals such as force or pres-
sure transducers. Can also be used
for position feedback. 12-bit resolu-
tion ADC for ±10 V input (16-bit
option).
Outputs:
Analog motor command: ±10 V
range signal for driving servo
amplifiers; 16-bit resolution or
.0003 V, 3 mA.
Amp enable*: Signal to disable and
enable an amplifier. Amp enable
goes low when a motor-off condi-
tion occurs. For step motors, this
pin provides for reduced current
when low.
STEP OUT: Pulses for input to a step
motor driver. The pulses can be
either active low or high. Upon
Reset, the output will be low if the
SM jumper is on, Tristate if off. The
STEP OUT pin also provides the
PWM signal for servo motors.
Direction: Used with the STEP OUT
signal to give direction to step
motors or servo motors in the sign
magnitude mode.
Error*: The signal goes low when the
position error on any axis exceeds
the limit specified by the error com-
mand, ER.
Output 1­ Output 8: These 8 TTL out-
puts are uncommitted and can be
designated by theuser to toggle
relays and trigger external events.
The output lines are toggled by Set
Bit (SB), Clear Bit (CB), Define Bit
(OB), and OP instructions. Upon
reset these signals will be low.
Outputs 9 ­16 available with
DMC-1550­1580.
* Active low
# Optoisolated 2.2 K
in series; requires at least 1 mA
to activate.
Specifications (continued)
M O T I O N C O N T R O L L E R S
DMC-1500
Stand-alone RS232
36
DMC-1500 Stand-alone RS232 Controller
·
Galil Motion Control, Inc.
·
800-377-6329

<< Previous       1 .. 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41       Next >>



Other Documents:
2004catalog, ampmotororder, blm n 23, catcps, catmotors, ctool, ioc 7007, pcicompar, programming, softorder, system, utilities, wsdk, activelife, camalot, mojavaton, smmov, Filter Equiv, note 1410, note 1411, note 1412, eseries brochure, ethernet dmc 21x 2, ethernet emerge, ethernet flight, ethernet horizons, pr 03 30 00, pr 10 1 98, pr 10 20 99, pr 11 30 00, pr 1 13 00, pr 2 18 98, pr 3 11 98, pr 3 2 98, pr 6 15 99, pr 7 1 99, pr 8 29 00, pr 9 13 99, pr 9 9 98, db 28040 qsi, bestvalue, jacob video, icmworksheet, note 1220, note 1222, note 2311, note 2312, note 2319, note 2321, note 2326,


WODocs | |
All rights reserved. wodocs.com© 2009
WODocs


New Docs

Documents Category:
Arts (Design, Movies, Music, Radio, Television)
Automotive (Cars, Marine, Motorcycle, ATV, Snowmobiles)
Business (Biotechnology and Pharmaceuticals, Chemicals, Construction and Maintenance, Materials, Real Estate, Services)
Electronics (Computers, Motion Control, Power Supply)
Games (Board, Family, Party, Card, Construction, RC Toys)
Health (Animalm, Beauty, Healthcare, Medicine, Pharmacy, Surgery, Weight Loss)
Home (Accessories, Cooking, Decor and Design, Electrical, Family, Pets)
News (Newspapers, Sports, Television)
Recreation (Collecting, Hiking, Scouting, Survival, Travel)
Reference (Education, Libraries and Archives, Museums)
Science (Agriculture, Astronomy, Biology, Chemistry)
Shopping (Antiques and Collectibles, Clothing, Flowers, Food, Home and Garden)
Sports (Bicycle, Snowboard, Skiing, Other)