Galil Motion Control 1700 Page 8
M O T I O N C O N T R O L L E R S
ISA BUS
DMC-1700
22
DMC-1700 ISA Bus Controller
·
Galil Motion Control, Inc.
·
800-377-6329
Connectors (continued)
J8 DMC-1780 (EH AXES) MAIN;
50 PIN IDC:
1 nc
2 Ground
3 +5V
4 Error Output
5 Reset
6 Encoder-Compare Output
7 Ground
8 Ground
9 Motor command H
10 Sign H / Dir H
11 PWM H / Step H
12 Motor command G
13 Sign G / Dir G
14 PWM G / Step G
15 Motor command F
16 Sign F/ Dir F
17 PWM F/ Step F
18 Motor command E
19 Sign E/ Dir E
20 PWM E / Step E
21 Amp enable H
22 Amp enable G
23 Amp enable F
24 Amp enable E
25 A+ E
26 A- E
27 B+ E
28 B- E
29 I+ E
30 I- E
31 A+ F
32 A- F
33 B+ F
34 B- F
35 I+ F
36 I- F
37 A+ G
38 A- G
39 B+ G
40 B- G
41 I+ G
42 I- G
43 A+ H
44 A- H
45 B+ H
46 B- H
47 I+ H
48 I- H
49 +12V
50 +12V
J6 DMC-1780 (EH AXES) MAIN;
50-PIN IDC:
51 nc
52 Ground
53 +5V
54 Limit common
55 Home H
56 Reverse limit H
57 Forward limit H
58 Home G
59 Reverse limit G
60 Forward limit G
61 Home F
62 Reverse limit F
63 Forward limit F
64 Home E
65 Reverse limit E
66 Forward limit E
67 Ground
68 +5V
69 Input common
70 Latch E
71 Latch F
72 Latch G
73 Latch H
74 Input 13
75 Input 14
76 Input 15
77 Input 16
78 Reserved
79 Output 1
80 Output 2
81 Output 3
82 Output 4
83 Output 5
84 Output 6
85 Output 7
86 Output 8
87 +5V
88 Ground
89 Ground
90 Ground
91 Input 17
92 Input 18
93 Input 19
94 Input 20
95 Input 21
96 Input 22
97 Input 23
98 Input 24
99 -12V
100 -12V
J7 DMC-1780 (EH AXES)
AUXILIARY ENCODER; 26-PIN IDC :
1 +5V
2 Ground
3 A+ Aux E
4 A- Aux E
5 B+ Aux E
6 B- Aux E
7 A+ Aux F
8 A- Aux F
9 B+ Aux F
10 B- Aux F
11 +5V
12 Ground
13 A+ Aux G
14 A- Aux G
15 B+ Aux G
16 B- Aux G
17 A+ Aux H
18 A- Aux H
19 B+ Aux H
20 B- Aux H
21 Sample Clock
22 NC
23 NC
24 NC
25 NC
26 NC
Note: The A, B, C, D axes and other I/O are located on
the main DMC-1740 card.
CB50100 Connector Board
The CB50100 converts the two 50-pin ribbon
cables from the DMC-1780 into a single 100-
pin high density connector which brings the
cable out of the back of the PC.
