M O T I O N C O N T R O L L E R S
Email: galil@galilmc.com
·
www.galilmc.com
·
Galil Motion Control, Inc.
·
DMC-1400 ISA, PC/104, RS232 Controllers
7
ICM-1460
INTERCONNECT
MODULE
The ICM-1460 interconnect module
provides easy connections between
the DMC-1400 Series controller and
other system elements, such as an
amplifier, encoder, and external
switches. The ICM-1460 accepts the
37-pin D type cable from the DMC-
1410 or a 40-pin to 37-pin cable
from the DMC-1411 and breaks it
into screw-type terminals. Each
screw terminal is labeled for quick
connection of system elements.
The ICM-1460 is packaged as a
circuit board contained in a metal
enclosure. A version of the ICM-
1460 is also available with servo
amplifiers.
S P E C I F I C A T I O N S
Minimum motor inductance: 1 mH
PWM frequency: 30 KHz
Ambient operating temperature: 0° to 70° C
Dimensions: 6.9"
×
4.9"
×
2.6"
Weight: 1 lb
Mounting: Keyholes--.2"
Gain: 1 amp/V
AMP-1460
MATING POWER
AMPLIFIER
The AMP-1460 series is a mating,
brush-type servo amplifier for the
DMC-1400 Series. The amplifier is
rated for 7 amps continuous, 10
amps peak at up to 80 V. The gain
of the AMP-1460 is 1 amp/V. The
AMP-1460 requires an external DC
supply. The AMP-1460 connects
directly to the DMC-1410 37-pin
ribbon, and screw-type terminals are
provided for connection to motors,
encoders, and external switches.
ICM-1460
Interconnect Module
(shown with and
without cover)
ISA,PC/104, RS232
DMC-1400
