Service Diagram
Tech Notes
Scalpel
TM -
Composite Seatstay
Page 2 of 2
TN003.PDF
August 2003
Publication Title
Publication No.
4.
The T-shaft screws (4) should be checked for tightness periodically. Loose screws can result in play detected in
the seatstay. When installing the screws, be sure to apply Loctite #242 to the threads and tighten to 2.25 N·m
(20.0 In·Lbs).
5.
Install cable/line housing guides (6) into the right side of the seatstay, route the cable through the seatstay guides
first. Then, insert the small end of the guide into the seatstay as indicated.
Parts
The following table is for reference only.
Replacement/Renewal Kits
The following replacement parts and kits are available only through an authorized Cannondale Dealer.
CAUTION: Do not over-tighten the T-shaft screws. Over-tightening will result in damage to the flange bush-
ings
REF
QTY
BPCS
DESC
1
1
114704B
Composite seatstay
2
4
112636
NUT,T-Shaft,for Scalpel
3
4
112677
BUSHING,Flanged,6mmIDx5.5mmL
4
4
103218
SCREW,M4x.7x8mmSOC HEA
5
4
113032
WASHER,SS,.162IDx.308O
6
2
113856
THRU-ADAPTER ANGLE,CAB
CANNONDALE
KIT #
REF/QTY
KF069/
1, 2(4), 3(4), 4(4), 5(4)
KF086/
6(10)
KF056/
4(10), 5(10)
DESCRIPTION
Kit, Seatstay,Composite,Scalp.
Kit,Hydraul. Brk Guides,10 pcs
Kit, Screws/washers,10 - Scalp
