E.35
CHAPTER FOUR
Inspection, Adjustment & Lubrication
Tracking adjustment
A Dash or Dash Pro can be aligned so it will
track, or roll in a straight line. Before performing
this procedure, properly inflate the tires and
push the jogger straight forward on a smooth,
flat surface to see if it turns right, left, or goes
straight.
To adjust the tracking
1. Unlock the tension bar (Figure 4.29) by pulling
back and up after opening the locking pins.
The tension bar must be unlocked to release the tension on
the cables.
2. Rotate a barrel adjuster to increase the cable
tension of the cable on the side to which the
jogger turns.
If the jogger turns to the right, lengthen the right cable or
shorten the left cable. If the jogger turns left, lengthen the
left cable or shorten the right cable.
To lengthen the cable, turn the barrel adjuster IN. To shorten
the cable, turn the barrel adjuster OUT. Do not over-extend
a barrel adjuster, as this could damage the threads.
3. Re-lock the tension bar.
Figure 4.30- Dash steering
adjustment cables
Barrel
adjuster
Figure 4.29- Dash and Dash Pro
tension bar
Locking
tension
bar
