E.29
CHAPTER FOUR
Inspection, Adjustment & Lubrication
Dash and Dash Pro
To fold the Dash and Dash Pro
If desired, the front wheel may be removed. If you need
instructions to remove a wheel, see
Check all wheels of
the child carrier before every ride
on pages 3-5.
1. Open the brake quick-release lever.
This is shown on pages 31-32.
2. Pull the locking pins (Figure 4.16) and then
pull the locking tension bar (Figure 4.14) into
its upper, unlocked position.
3. Gently fold the stroller handlebar forward.
Be careful not to catch or pinch any of the stroller's fabric parts.
4. Fold the wheel struts (Figure 4.15) forward.
To unfold the Dash and Dash Pro
1. Fold the wheel struts (Figure 4.15) back.
2. Gently fold the stroller handlebar up and back,
Be careful not to catch or pinch any of the stroller's fabric
parts.
3. Pull the locking tension pins (Figure 4.16) and
then pull the locking tension bar into its lower,
locked position.
4. Install the wheels.
If you need instructions to install a wheel, see
Check all
wheels of the child carrier before every ride
on
pages 3-5.
5. Close the brake quick-release.
Figure 4.15- Dash wheel struts
Handlebar
Wheel struts
Locking
tension
bar
Figure 4.14- Dash tension bar
Figure 4.16- Locking pin
Locking
pin (left
side)
