Spirit Elements Huron Pool Cabana Assembly Instructions Page 11
23
. Position 2nd
Middle Roof Panel on top
plates of wall. Line up ridge peaks with other
roof panels and screw together as per
Step 20.
Screw rafters of outside and middle panels
together as per
Step 22.
Screw roof panels together through
rafters with 3 - 3" screws per side.
22.
With Rafters of outside and middle
roof panels aligned, attach to one another
with 3 - 3" screws.
25.
With all the roof panels attached
together, check from the outside front corners
how rafters are sitting on wall framing. Adjust
by pushing roof so rafters are equally
positioned on both sides of shed.
Rafters sitting on
walls equally on
both sides of
shed.
24.
Position final Outside Roof
Panels on top of gable framing and
top wall plates. Line up all rafters
and secure as described in
previous roof panel placement
steps. Be sure to screw rafters from
middle roof panels into rafters of
outside roof panels and at roof
ridge peaks.
Final Outside
Roof Panels.
SpiritElements.com | cs@SpiritElements.com | Fax: 1.800.511.1421 | Toll Line: 1.800.511.1440 | 80301, Colorado, Boulder, 6672 Gunpark Drive
Page 11
