Spirit Elements Huron Pool Cabana Assembly Instructions Page 10
20
. Position 2nd
Outside Roof Panel
on wall and gable.
Line both outside
roof panels up so
rafters and roof
ridge peaks line up.
When aligned,
attach ridge peaks
of roof panels
together with
4 - 1 1/2" screws.
roof ridge peaks
attach with 4
1 1/2" screws
21.
Position 1st
Middle Roof Panel on
top plate of walls. Line up rafters of
middle and outside panels. Strong ties
will sit flush against top plate.
Middle Roof
Panel
19.
Starting with one
Outside Roof Panel, place on top
of the top wall plate and gable framing. The outside roof
panel can be identified because the shingles overhang the
rafters by approx. 6" on one side.
Outside Rafter of roof panel will sit on
gable framing. Strong tie will sit flush
against top wall plate.
Important - Do not attach roof to walls
until Step 26.
Rafter sits on
gable framing.
Page 10
6672 Gunpark Drive, Boulder, Colorado, 80301 | Toll Line: 1.800.511.1440 | Fax: 1.800.511.1421 | cs@SpiritElements.com | SpiritElements.com
Top Plates
