D+GA Project No. 9926
EPDM Single-Ply Membrane Roofing
16 October 2001
07531 - 1
LAWRENCE BLOOD PLASMA CENTER
3620 NORTH POST ROAD
SECTION 07531 - EPDM SINGLE-PLY MEMBRANE ROOFING
PART 1 - GENERAL
Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
Specification Sections, apply to this Section.
This Section includes the following:
Adhered sheet roofing.
RELATED WORK SPECIFIED ELSEWHERE:
Wood nailers, blocking, and other related items are specified Section 06100 - Rough Carpentry.
Flashing and sheet metal is specified Section 07600 - Flashing and Sheet Metal.
Copings are specified in another Section 07710 - Manufactured Roof Specialties.
Roofing Terminology: Refer to ASTM D 1079 for definition of terms related to roofing work not otherwise defined in
General: Install sheet membrane roofing and base flashing that are watertight; will not permit the passage of liquid
water; and will withstand wind loads, thermally induced movement, and exposure to weather without failure.
Material Compatibility: Provide roofing materials that are compatible with one another under conditions of service and
application required, as demonstrated by roofing system manufacturer based on testing and field experience.
FM Listing: Provide sheet membrane, base flashings, and component materials that meet requirements of FM 4450
and FM 4470 as part of a roofing system and that are listed in FM's "Approval Guide" for Class 1 or noncombustible
construction, as applicable. Identify materials with FM markings.
Roofing system shall comply with the following:
Fire/Windstorm Classification: Class 1A-90.
Product Data: For each type of roofing product specified. Include data substantiating that materials comply with
Shop Drawings: Include plans, sections, and details of the following:
Base flashings and membrane terminations.