Stough Design Company 05500 Metal Fabrications Page 5
D+GA Project No. 9926
Metal Fabrications
16 October 2001
05500 - 5
3.04
ADJUSTING AND CLEANING:
A.
Touch-up Painting: Immediately after erection, clean field welds, bolted connections, and abraded areas of shop paint,
and paint exposed areas with same material as used for shop painting to comply with SSPC-PA 1 requirements for
touching up shop-painted surfaces.
1.
Apply by brush or spray to provide a 2.0-mil minimum dry film thickness.
END OF SECTION 05500
